Passivbot can be installed and used either by installing it manually, or by starting it using Docker. This page contains a description of both installation methods, and a step-by-step walkthrough.
Since Passivbot is written in Python, the easiest way to start it is by simply running it as a Python program. The next sections describe what you will need to install & be able to run Passivbot, and how to get it installed.
When installing the bot for the first time, you can simply clone the repository using the following command from a terminal:
git clone https://github.com/enarjord/passivbot.git
This will create a folder
passivbot, with the code checkout on the master branch (this is the default where all stable & verified updates are pushed to).
After the code has been checked out, you will need to install the python dependencies using the following commands:
cd passivbot pip install -r requirements.txt
Updating the bot is as straightforward as getting the latest version, and stopping and starting the bot. Before starting an upgrade, please make sure your bot is in an acceptable state to upgrade (e.g. does it have a position open that will be time-critical).
If you've installed the bot using the git clone instructions above, please follow these steps to upgrade:
1) Shutdown the bot as described in Running live
2) Pull the latest version of the bot by issueing
git pull from the terminal.
3) Start the bot again using the command described in Running live
When you are working with the bot for a longer period of time, there is a chance you may want to stick to a specific
version for a while, even though the
master branch may have some breaking changes since you last upgraded.
In cases this happens, you can simply switch to the appropriate branch using git. If you are not familiar with using git, you can learn more about it on this website.
At the moment, the Docker image is not built automatically yet. For now you can build the Docker image locally and push it into your local Docker image repository using the following command from the root folder:
docker build -t passivbot .
After building the docker image and having added it to your local container registry, you can use this image to create a container to run commands in. These instructions assume you have a recent working version of Docker installed on the machine where this is executed from.
Starting live mode¶
In order to start passivbot live with Docker, you'll need to mount the config folder in order to make the required information available. To start passivbot in live mode, you can issue the following command from the root folder of passivbot:
docker run --name passivbot -d -v $PASSIVBOT_ROOT/config:/passivbot/config passivbot
The $PASSIVBOT_ROOT should be replaced with the location of your passivbot-folder (e.g. /home/passivbot)
For more detailed information on how to run a docker container, please check the Docker documentation.
Installing on a Raspberry Pi¶
This process currently only installs the requirements to run the bot live. You will need to do the backtesting and optimising on different (more powerful) hardware.
Tested on a Raspberry Pi 3b with Raspberry Pi OS Kernel version 5.10.
Raspberry Pi OS currently uses Python2.7 and Python3.7, we need Python3.8.x. If you already have python3.8 installed, you can skip ahead to
Installing the requirements.
To install the dependencies for Python3.8 run the following:
sudo apt-get update sudo apt-get install -y build-essential tk-dev libncurses5-dev libncursesw5-dev libreadline6-dev libdb5.3-dev libgdbm-dev libsqlite3-dev libssl-dev libbz2-dev libexpat1-dev liblzma-dev zlib1g-dev libffi-dev
To download, unpack and install Python3.8 run the following (this might take a long time):
wget https://www.python.org/ftp/python/3.8.11/Python-3.8.11.tgz sudo tar zxf Python-3.8.11.tgz cd Python-3.8.11 sudo ./configure --enable-optimizations sudo make -j 4 sudo make altinstall
Upgrade pip and setuptools:
sudo pip3.8 install --upgrade pip pip3.8 install setuptools --upgrade
Installing the requirements¶
Clone the repository:
git clone https://github.com/enarjord/passivbot.git cd passivbot
sudo apt install llvm-9 LLVM_CONFIG=llvm-config-9 pip3.8 install llvmlite
Install the requirements:
python3.8 -m pip install -r requirements_liveonly.txt
That's it, you're ready to run the bot live.
When Running live you will need to start the bot with